Comtech EF Data MBT-5000 - Manual (Page 85)

MBT-5000 L-Band Up/Down Converter System MN-MBT5000
Ethernet-based Remote Product Management Revision 4
6–7
6.5 HTTP (Web Server) Interface
A user-supplied Web browser allows the full monitor and control (M&C) of the MBT-5000 from
its HTTP Interface. This non-secure, embedded Web application is designed for, and works best
with, Microsoft’s Internet Explorer Version 5.5 or higher (the examples shown use Internet
Explorer Version 7.0).
6.5.1 Enable the Web Server Interface
You can verify the IP Address from the MBT-5000 front panel menus: CONFIG:
Remote Control  Ethernet  Address. See Chapter 5. FRONT PANEL OPERATION
for complete details about using this local M&C interface.
To enable the Web Server Interface in the MBT-5000 using only a 100BaseTx remote interface
(this assumes you are running Microsoft Windows OS), do these steps:
1) Select Start, then Run,
then type “cmd” to
open the command
prompt window:
2) Start a Telnet session
with the unit at the
default IP address of
192.168.1.4:
3) Enter the Telnet
username and
password (the default
for both parameters is
comtech):
Failure to enter the correct User name and Password will return you to a blank login screen.