Comtech EF Data MBT-5000 User Manual
Page 99
MBT-5000 L-Band Up/Down Converter System
MN-MBT5000
Ethernet-based Remote Product Management
Revision 4
6–21
• Clear Events Log: Select to clear all stored events from the log.
• Initialize Events Pointer: Select to reset the internal pointer to allow queries to start at the
beginning of the stored events log.
Click [Submit] to execute the choice – the window will update according to the selection made.
Alarm Mask
Use the drop-down lists to select each alarm as Fault, Alarm, or Masked for:
• Low Forward RF Power (operable when the BUC is optionally configured with the Power
Monitor feature).
• Converter A Not Inserted.
• Converter B Not Inserted.
• LNA Current Detect (operable when the BDC is optionally configured with an LNA).
• External Reference Lock Detected.
• PS (Power Supply 1 or 2).
Click [Change Alarm Mask] to save. If it is desired to revert back to the previously assigned
Alarm Mask settings, click [Reset] instead.