Crest Electronics CRE57000 TRAIN ENGINEER REVOLUTION MANUAL - Manual (Page 26)

26
3.ADD MU/SU CAB
This Menu is used each time a new locomotive
is added to the transmitter. Its purpose is to
assign a Cab Number a locomotive so that it
can be quickly identified and selected from the
main operation screen. This is where you assign
a locomotive it’s Single Unit (SU) Cab Number
and where you set up consists of up to six
locomotives and assign them Multiple Unit (MU) Cab Numbers.
Single Unit (SU) Cab assignments
1) Use the t and u keys to choose a Cab
Number to assign to a locomotive. This range
is set by 2.USAGE OF CABS.
2) Make sure that MU MODE: is set to OFF for
SU mode.
3) Use the t and u keys to select your
locomotive, under SU by the Link Address assigned in 1.ASSIGN FUNCTIONS.
4) Press MENU to save this set-up and return to the Main Menu. Press MENU again
to return to the operating screen.
Multiple Unit (MU) Cab assignments
1) From the Main Menu screen use p and q
to select 3.ADD MU/SU CAB and press
ENTER
2) Use the t and u keys to choose a Cab
Number to assign to the Multiple Unit (MU)
consist. This range is set by 2.USAGE OF
CABS.
3) Use the t and u keys to change MU MODE
to ON. The menu changes to allow you to
enter a list of locomotives that are to be
MUed.
4) Select the first (lead) locomotive as MU1 by using t and u keys to select the
Link Address assigned to it. Use the q key to move to the next locomotive.
5) Select the second locomotive in the consist as MU2 by using t and u keys to
select the Link Address assigned to it. Use the q key again to move to the next
locomotive.
6) Continue the MU assignments until all of the locomotives (up to a maximum of 6)
that you want to MU in a single consist, are listed.
7) Press MENU to save this set-up and return to the Main Menu. Press MENU again
to return to the operating screen.
MAIN SET UP
1.ASSIGN FUNCTION
2.USAGE OF CAB
3.ADD MU/SU ¤
4.COPY LOCO
5.SYSTEM CONFIGURE
3.ADD MU/SU CAB
CAB NO: CAB-0
MU MODE: OFF
SU [49] L49
3.ADD MU/SU CAB
CAB NO: CAB-0
MU MODE: ON
MU1 [00]
MU2 NOT SELECTED
MU3 NOT SELECTED
MU4 NOT SELECTED
MU5 NOT SELECTED
MU6 NOT SELECTED