Daktronics All Sport CG - Manual (Page 11)

Operation 5
NEW GAME
ENTER TO MODI FY
HOME TEAM NAME
ENTER TO MODI FY HOME TEAM NAME
_OME
Section 3: Operation
There are two primary modes in which the All Sport CG can operate:
• Automatic Mode: Game data is received from the All Sport controller using a wire connection
or wireless radio signal (refer to Section 2.4).
• Manual Mode: Game data is generated using the keypad, without using an All Sport controller.
Some of the menu options can be adjusted in both modes, while others are for Manual mode only.
3.1 Menu Options
• Press <MENU> to access the setup options.
• Use <↑> and <↓> to move between menu items.
• Press <MENU> again at any time to exit.
New Game
Press <ENTER */EDIT> to clear all of the current game
information.
Note: This action is only available in Manual mode and cannot be undone!
Guest & Home Team Name
To enter team names, use the Alpha-Numeric insert printed on the back of the sport insert.
Press <ENTER */EDIT> to modify the team name. The currently selected letter will flash.
Use the keypad to type in a name or abbreviation for the team (up to 10 characters). After
entering a team name, press <ENTER */EDIT> to save.
These menu items can be set in both Automatic and Manual modes.
Note: Team names must be configured on the All Sport CG when it is used in Manual
mode or with an All Sport 3000 series controller. The All Sport 5000 and 5500 controllers
can output team names as part of the data transferred to the All Sport CG.
Alpha-Numeric Keypad Insert
The All Sport CG has an alpha-numeric keypad insert used for entering team names (refer to
Drawing A-239213).
Entering words is identical to that of a touchtone phone, with no letters on key 1, and the rest
of the letters assigned in groups on keys 2-9. Press 0 to insert a space. When prompted to
enter text, the LCD will display a flashing cursor. Type in the name and press <ENTER
*/EDIT> to save the changes.