Timing, Baseball, Ball – Daktronics All Sport CG User Manual
Page 14: Strike
8
Operation
TI ME EDI T SET
CURR ^8:00*
TI ME 8:00
SELECT ALT I TEM
MAI N CLOCK-DOWN
1-UP 2-DOWN
B=0 S=0 O=0
*G= 0 H= 0 I = 1
Timing
Every sport but baseball and tennis has a timing function.
Press <SET TIME*> and use the keypad to type in the
value. Press <ENTER*/EDIT> again to save.
The clock can also be set to count up or count down (default). Press <CLEAR/ALT> followed
by <SET TIME*>, and then press <1> to count up or <2> to count down.
To start the clock, press <START/↑>.
To stop the clock, press <STOP/↓>.
Baseball
The following buttons and functions are unique to the
baseball sport mode. Refer to Drawing A-1022172 to view
the baseball insert for the keypad.
Baseball Scoring Output:
Ball
• Press <BALL +1/-1> to increment the ball number.
• Press <CLEAR/ALT> followed by <BALL +1/-1> to decrement the ball number.
• Press <ENTER*/EDIT> followed by <BALL +1/-1> to edit the ball number.
Use the keypad to type in the value, and then press <ENTER*/EDIT> again to save.
• Press <CLEAR BALL & STRIKE> to remove all ball (and strike) information.
Strike
• Press <STRIKE +1/-1> to increment the strike number.
• Press <CLEAR/ALT> followed by <STRIKE +1/-1> to decrement the strike number.
• Press <ENTER*/EDIT> followed by <STRIKE +1/-1> to edit the strike number.
Use the keypad to type in the value, and then press <ENTER*/EDIT> again to save.
• Press <CLEAR BALL & STRIKE> to remove all strike (and ball) information.
Out
• Press <OUT +1/-1> to increment the out number.
• Press <CLEAR/ALT> followed by <OUT +1/-1> to decrement the out number.
• Press <ENTER*/EDIT> followed by <OUT +1/-1> to edit the number of outs.
Use the keypad to type in the value, and then press <ENTER*/EDIT> again to save.