Daktronics Remote Control System RC-100 - Manual (Page 19)

RC-100 Base Station 11
Installations with a Central Base Station
If the installation includes a central Base Station located approximately 3000' (914 m) or closer
to all other Base Stations, a Base Station set on channel 1 may be installed in this location.
All other Base Stations may be set to values in the primary and extended channel groups for
this channel number to avoid interference within the channels. Figure 7 shows an example of
a baseball facility with 9 diamonds, each having its own server Base Station.
Note: In order to remain synchronized with one another, no Base Station in the area may be
set to channel 6 or 11. Also, the central Base Station must remain on at all times during the
operation of any other Base Station.
Figure 7: Multiple Base Stations w/ Central Location