Section 11: tennis operation, 1 court selection, 2 tennis keys – Daktronics Remote Control System RC-100 User Manual

Page 49: Serve, Section 11, Tennis operation, Court selection, Tennis keys

Advertising
background image

Tennis Operation

41

Section 11: Tennis Operation

Sport Insert: LL-2607

Code: 08

The sport insert drawing is located in Appendix B. If an insert is lost or damaged, a copy of the insert
drawing can be used until a replacement arrives. Refer Section 4.1 for information on starting the
console and Section 5.3 for additional All Sport application keys.

11.1 Court Selection

Multiple wireless handheld controllers may be connected to a single wireless Base Station in
the Tennis application. Each connected handheld controller will operate a specific court, and
the controller number for the handheld is selected when powered up.

Display

Action

NN = current setting


Enter the controller number for the court that this
particular handheld will operate and then press
<ENTER>.

Typically, controller 1 would run court 1, controller 2
would run court 2, and so on. Some systems may be set
up differently.



If the controller number entered has already

been selected, the error message at left will
display. Select another number.

If the controller number entered is too high, the

error message at left will display. Select another
number.

11.2 Tennis Keys

Serve

Display

Action


Press the appropriate TOP or BOTTOM <SERVE> key
to turn the serve indicators ON or OFF for the respective
player/team.


ENTER CONTROLLER
NUMBER NN*

ERROR - NUMBER
TAKEN

ERROR - I NVALI D
NUMBER

TOP SERVE
ON

Advertising