Dataprobe iPIO-2 Operation Manual - Manual (Page 18)

iPIO-2816_v140120e iPIO-2, iPIO-8, iPIO-16 Users Guide Page 18

Input. Email on any input change

Relay. Email on any relay change

Communication. Email on any change in communication status to the remotes.

Configuration. Email on any configuration change.
To use the SNMP, download the iPIO MIB at
http://dataprobe.com/support.aspx
7.5. Input Setup
Select the input to be configured
from the dropdown box.
Input Name
Each input has a user definable
name (20 characters max.)
Qualifying Time
Set the time, in seconds (0-99)
that the input must be
continuously in any new state to
have the iPIO recognize the
change in state.
Open and Closed Names
Both the Open and Closed
conditions have a user definable
Name (20 characters max.)
Open and Closed Colors
The user may also select colors for the background and text. To select the colors, click on the color boxes
below the Open and Closed names.
Click Save when done, before moving to the next input or setup section
LED Status
The user may select upon what state of the input the LED for that channel will be ON or Off. Select with the
radio button.