Dataprobe iPIO-2 Operation Manual - Manual (Page 19)

iPIO-2816_v140120e iPIO-2, iPIO-8, iPIO-16 Users Guide Page 19
7.6. Relay Setup
Select the input to be configured
from the dropdown box.
Relay Name
Each input has a user definable
name (20 characters max.)
Open and Closed Names
Both the Open and Closed
conditions have a user definable
Name (20 characters max.)
Open and Closed Colors
The user may also select colors
for the background and text. To
select the colors, click on the color boxes below the Open and Closed names.
Click Save when done, before moving to the next input or setup section
LED Status
The user may select upon what state of the input the LED for that channel will be ON or Off. Select with the
radio button.
7.7. Remote Setup
To allow multiple Dataprobe
products to communicate and
control one another, each device
must be setup to communicate
with the devices that are remote
to it.
Adding a remote will allow the
inputs of this iPIO unit to control
the outputs of another iPIO unit,
or multiple units. Additional
Dataprobe products, like iBoot-G2
series power controller can also
be remotes that are controlled by
this iPIO. To achieve bi-directional
control between two iPIO units,
each must be programmed with
the other as a remote.
To add the first device, click on
Add Device. This will generate
the setup screen for the first
remote. To add additional
remotes, click on Add Device for
each one. Up to 32 remote units
can be programmed.