DFI LR102-B18D/B18S - Manual (Page 55)

55
2
Hardware Installation
Installing the XLT0-2C1G2U onto the LR102 (op-
tional)
Important:
The carrier board used in this section is for reference purpose only.
These illustrations are mainly to guide you on how to install the XLT0-
2C1G2U onto the LR102 of your choice.
2. Insert the provided mounting screws into the mounting holes - from the bot-
tom through the top of the carrier board.
Mounting screws
1. The photo below shows the locations of the mounting holes.
Mounting hole