DFI LR102-B18D/B18S - Manual (Page 91)

91
3
BIOS Setup
South Bridge Configuration
Disabled
2 USB Ports
4 USB Ports
6 USB Ports
8 USB Ports
10 USB Ports
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
South Bridge Chipset Configuration
USB Functions [10 USB Ports]
USB 2.0 Controller [Enabled]
GbE Controller [Enabled]
GbE LAN Boot [Disabled]
GbE Wake Up from S5 [Disabled]
HDA Controller [Enabled]
Chipset
Options
USB Functions
Selects the number of USB ports you want enabled.
USB 2.0 Controller
Enables or disables the Enhanced Host Controller Interface (USB 2.0) .
GbE Controller
Enables or disables the GbE Controller .
GbE LAN Boot
Enable this field if you want to use the boot ROM (instead of a disk drive) to
boot-up the system and access the local area network directly. If you want to
change the boot ROM’s settings, type the <Shift> and <F10> keys simulta-
neously when prompted during boot-up. Take note: you will be able to access
the boot ROM’s program (by typing <Shift> + <F10>) only when this field is
enabled.
GbE Wake Up From S5
When enabled, it allows the system to wake up from S5 via the network LAN.
HDA Controller
Enables or disables the High Definition audio controller.