DFI LR102-B18D/B18S - Manual (Page 68)

68
3
BIOS Setup
Hardware Health Configuration
This section is used to configure the hardware monitor function.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Hardware Health Configuration
Case Open Detection
System Temperature
CPU Temperature
SYSFAN Speed
CPUFAN Speed
Vcore
5V
1.05V
1.5V
12V
VSB
VBAT
CPUFAN Mode Setting
CPUFAN PWM Control
Advanced
[Disabled]
:48 o C/118 o F
:60 o C/140 o F
:NA
:6250 RPM
:1.184 V
:5.222 V
:1.056 V
:1.840 V
:12.355 V
:3.440 V
:3.088 V
[Manual Mode]
[255]
Case Open Detection
Set this field to Enabled to allow the system to alert you of a chassis intru-
sion event.
System Temperature to VBAT (V)
These fields will show the temperature, fan speed and output voltage of the
monitored devices or components.
CPU Fan Mode Setting
Selects the CPU fan’s mode. The options are Manual Mode and Thermal
Cruise Mode.
CPU Fan PWM Control
This is the PWM’s duty cycle control. Enter the CPU fan’s speed in this field.
The higher the value, the faster the CPU fan’s speed.
Enabled for Case Open
Detection. If Case is
open, system will show
warning message and beep
warning.