DFI EL331-RM - Manual (Page 64)

64
3
BIOS Setup
Suspend Mode
This field is used to select the type of Suspend mode.
S1(POS)
Enables the Power On Suspend function.
S3(STR)
Enables the Suspend to RAM function.
Repost Video on S3 Resume
When this field is set to Auto, the system will initialize the VGA BIOS when
it wakes up from the S3 state. This can be configured only if the “Suspend
Mode” field is set to “S3(STR)”. When this feature is disabled, the system
resume time is shortened but system will need an AGP driver to initialize
the VGA card. Therefore, if the AGP driver of the card does not support the
initialization feature, the display may work abnormally or not function after
resuming from S3.