DNF Controls ST304-DSR1K-HL - Manual (Page 23)

ST304-DSR1K, Slow Motion Controller 1 1 9 9 o o f f 2 2 7 7
SLOMO
ST300 display shows
(T-Bar version):
ST300 display shows
(Non T-Bar version):
Press Softkey {TBAR} (or [WHEEL]) to toggle between T-BAR and
WHEEL.
The T-BAR has two speed ranges:
0 Æ +200 with a detent at +100 % play speed
OR
0 Æ +100 with a detent at +100%
For Wheel only:
Press Softkey {SPDRANGE} to select SLOMO speed ranges:
Press Softkey to select: 0 Æ +200 OR -100 Æ +200.
Press Softkey {BACK} to return to SLOMO MENU.
Press [ESC] to exit SETUP MENU
OR
Turn the Wheel to select another item.
For Wheel only:
Press Softkey {PRSET} to select the SLOMO Preset Speed Mode.
Press Softkey {UPDATE}.
When exiting SLOMO mode, the last used speed is saved in the Preset
Speed register.
Press Softkey {STATIC}.
The Preset Speed register is NOT updated when exiting SLOMO mode.
It is only changed by [SHIFT] + [SLOMO] (PRESET SLOMO).
TBAR
AUTOENABLE
Press Softkey {ON} to enable slomo to be engaged by moving the
TBAR.
WHEEL
AUTOENABLE
Press Softkey {JOG} or {SHUTTLE} to enable that function to be
engaged by turning the Wheel.
GANG MODE Press Softkey to select {PERMANENT} GANG (described in the
FUNCTION Table) or {TEMPORARY} GANG.
In TEMPORARY mode, press and hold the VTR key that you want to
read status from, then press the VTR#s of those VTRs that you want to
include in the gang. Release the keys. The LED on the monitored VTR
blinks, all other VTRs in the gang stay on constantly. To break the
temporary gang, press any VTR# key.
SLOMO with: WHEEL
SpdRange Preset
SLOMO with: TBAR
Wheel SpdRange Preset