Installing the 46" lawn mower deck – DR Power 46 Lawn Mower Deck User Manual
Page 17
DR 46" LAWN MOWER DECK Safety & Operating Instructions
13
Installing the 46" Lawn Mower Deck
Note:
It will help to place the front of the lawn mower deck against a wall so you can
push against it, or have another person help you with the installation.
1. Block the rear of the lawn mower deck up about 2", and line up the power unit with
the deck (Figure 11).
2. Place the Pivot Shim on the machine opening for the Pivot Tube (Figure 12).
3. Apply a light coat of grease or oil to the Pivot Tube (Figure 12) to allow the mower deck to
slide on more easily.
4. Mount the deck by lining up the Pivot Tube with the Pivot Shim and inserting
the Pivot Tube in the hole in the frame of the machine.
5. Install the Deck Support Bracket (Figure 13) with the two (2) 5/16" Lock Nuts
and tighten.
WARNING! Before performing any maintenance procedure, stop the
engine and disconnect the spark plug wire(s).
Figure 11
Figure 12
Figure 13