Removing and replacing the 56" deck drive belt – DR Power 46 Lawn Mower Deck User Manual
Page 30
Advertising
26
DR 46" LAWN MOWER DECK Safety & Operating Instructions
Removing and Replacing the 56" Deck Drive Belt
Tools and Supplies Needed:
■
1/2" Socket w/extension
■
1/2" wrench
■
Vise Grip Pliers
■
56" x 5/8" Belt, CHP Part #101721
WARNING! Before performing any maintenance procedure, stop the
engine and disconnect the spark plug wire(s).
NOTICE! Use only a DR belt on your machine. The belt has been
thoroughly tested and proven for many hours of use.
1. To remove the Lawn Deck Drive Belt, refer to Pages 11 & 12 and perform Steps 1
through 9.
2. To replace the Lawn Deck Drive Belt, refer to Page 14 and perform Steps 6
through 11.
Advertising