Stopping the engine, Obstacle tips – DR Power Walk-behind 13 - 17 HP (April 2005 - August 2005) User Manual

Page 22

Advertising
background image

18

DR

ALL-TERRAIN

FIELD and BRUSH MOWER Safety & Operating Instructions

Stopping the Engine

1. Disengage the blade by pulling the Blade Control Lever (see Figure 1, on page 10)

back to the DISENGAGED position.

2. Move the Shift Lever to the N (Neutral) position.
3. Move the Throttle Control to the IDLE position.
4. Turn the Key to the OFF position and remove it for safety.
5. Set the Parking Brake.
Note: If your machine is equipped with a fuel shut-off valve, close it when

transporting or storing the mower.

Obstacle Tips

Dealing with obstacles in the terrain is easy with your new DR ALL-TERRAIN FIELD
and BRUSH

MOWER. The following section explains how to approach most common

obstacles.









Always check your work area before mowing and remove any debris that might tangle
or damage the machine.

If you do run into debris and the mower becomes tangled, turn off the engine and
disconnect the spark plug wire(s) before attempting to untangle the machine.

WARNING! The mower engine's power can easily throw stones,

sticks and other debris at great velocity, which could
cause personal injury or property damage. DO NOT
run the machine over gravel driveways or over loose

stones or mulch with the mower blade spinning.

Advertising
This manual is related to the following products: