Adjusting the blade engagement cable – DR Power Walk-behind 13 - 17 HP (April 2005 - August 2005) User Manual
Page 35
Advertising
DR
ALL-TERRAIN
FIELD and BRUSH MOWER Safety & Operating Instructions
31
Adjusting the Blade Engagement Cable
Note: If the blade won't cut, or seems to slip in heavy material, check the blade
engagement cable.
Tool Needed:
■
1/2" open-end wrench
On the right handlebar there is a black bracket for adjusting the blade engagement cable
(Figure 25). To tighten the cable, turn the center portion of the adjuster counter
clockwise. To loosen the cable, turn the adjuster clockwise.
Figure 25
WARNING! Before performing any maintenance procedure, stop the
engine and disconnect the spark plug wire(s).
Blade Engagement Cable Adjustment
Advertising
This manual is related to the following products: