Tire pressure check – DR Power Tow-Behind 9.59 Premier (September 2014 - Present) User Manual

Page 21

Advertising
background image

CONTACT US AT www.DRpower.com 21

Tire Pressure Check

Tools Needed:

Tire Pressure Gauge

Air Compressor

1. Remove the Valve Stem Protective Cap (Figure 57) and check the tire

pressure with a Tire Pressure Gauge.

2. Check what the manufacturers recommended pressure is that is stamped on

the side of the Tire.

3. If the pressure is too low, add air through the Valve Stem with an air hose.

4. Replace the Valve Stem Protective Cap when finished.

Connecting the Battery Wire (Electric-Starting Models Only)

We ship all Electric-Starting systems with the Negative Battery Terminal Wire
disconnected. This prevents the Battery from discharging during shipment.
Before using your DR LEAF and LAWN VACUUM, you must connect the Battery
Wire.

1. Connect the Negative Wire to the Negative Post on the Battery by sliding the

Terminal onto the Battery Post (Figure 58).

Negative
Battery
Cable

Figure 58

Do not over inflate the tires. Inflate to the manufacturers recommended
pressure found on the tires.

Valve Stem
with Cap

Figure 57

Advertising