Chapter 4: maintaining the dr roto-hog mini tiller, Regular maintenance checklist, Lubrication – DR Power Mini Tiller Roto-Hog (November 2008 - December 2014 ) User Manual

Page 14

Advertising
background image

14 DR

®

ROTO-HOG™ Mini Tiller

Chapter 4: Maintaining the DR ROTO-HOG Mini Tiller

This chapter covers regular maintenance procedures that will ensure the best performance and long life of your DR ROTO-
HOG Mini Tiller.

When performing any maintenance, you must first shut off the Engine; wait five (5) minutes to allow parts to cool and
disconnect the Spark Plug wire, keeping it away from the Spark Plug.

Regular Maintenance Checklist

NOTE: Consider that the service intervals shown are the maximum under normal operating conditions. Increase frequencies under

extremely dirty or dusty conditions.


Procedure

Before Each

Use

Every 8-20

Hours

Every 35

Hours

Check the Engine Fuel Level

Clean the Tines and Hood*

After each use

Check the general condition of the machine, e.g.
nuts, bolts, welds, etc.

Clean Engine Exterior & Cooling Fins

Check Battery Voltage

Clean Air Filter

Check Tines for Wear

Replace Air Filter

Replace Spark Plug

*

Cover the Engine Muffler, Carburetor, Air Filter, and Battery Box before using a hose to clean the Tines and Hood.


Lubrication

The Tines Drive Transmission Case has grease installed at the factory. We recommend that once a year to have the
Transmission opened by a qualified service professional and the grease level checked. Add a molylithium type grease
only if the level of the grease is below the top of the gears. DO NOT OVERFILL.

Advertising