DR Power 6.25 Premier Power Wagon User Manual
Page 33
Advertising
CALL TOLL-FREE 1-800-DR-OWNER
29
9. Tighten the Throttle Cable Clamp Screw making sure that the Throttle Handle is still in the
IDLE/STOP position. The Throttle Cable should have very little or no tension between the Cable
Clamp and the Throttle Plate.
10. Start the Engine and check the operation of the machine. The DR POWERWAGON-PREMIER
should idle smoothly, but should not move while idling, and should not jump after shifting into
gear.
IF YOU CLAMP THE CABLE WITH TOO MUCH TENSION BETWEEN THE CABLE CLAMP AND THE
THROTTLE PLATE, THE ENGINE WILL NOT RETURN TO IDLE PROPERLY.
Advertising