Specifications – DR Power Lawn Aerator User Manual
Page 7
CONTACT US AT www.DRpower.com 7
Specifications
Except for the Handlebar Assembly, your DR Lawn Aerator comes fully assembled.
Installing the Handlebar Assembly onto the Aerator Frame
Tools and Supplies Needed:
Two 7/16" Wrenches
1.
Cut the plastic wrap from around the Bail Bar Spring with a Utility Knife so
you can access the Spring (Figure 2).
2.
Disconnect the Bail Bar Spring from the Bail Bar Bracket.
3.
Cut the Cable Tie on the Tine Position Lever and rotate the Lever in towards
the machine.
Engine
Briggs and Stratton Manual-Start
Briggs and Stratton Electric-Start
Please refer to the Engine Operator’s Manual
for Engine-specifications.
Please refer to the Engine Operator’s Manual
for Engine-specifications.
Gearbox
Direct Engine Mount
Direct Engine Mount
Ratio
6:1 Reduction
6:1 Reduction
Shaft
.75" Diameter
.75" Diameter
Output Drive
V-Belt to Tine Crankshaft
V-Belt to Tine Crankshaft
Self-Propel
Automatic by Tine Engagement Action
Automatic by Tine Engagement Action
Speed
2.5 MPH
2.5 MPH
Aerator Tines
Cam Drive Action
Cam Drive Action
Crankshaft and Rods
Heavy Duty Cast Iron
Heavy Duty Cast Iron
Core-Punch End
Hardened Steel, Replaceable
Hardened Steel, Replaceable
Number Of Tines
3
3
Core Spacing
4"
4"
Core Depth
Up to 2.75"
Up to 2.75"
Frame Construction
.11" Thick Welded Steel
.11" Thick Welded Steel
Handlebars
1" Dia. x .12" Thick Steel Tubing w/ Foam Grip
1" Dia. x .12" Thick Steel Tubing w/ Foam Grip
Wheels
10" Dia., Steel w/ Bearings, Rubber Tread
10" Dia., Steel w/ Bearings, Rubber Tread
Tine Engage
Operator Presence Bail Bar
Operator Presence Bail Bar
Tine Position
Lever to Raise Tines for Transport/Storage
Lever to Raise Tines for Transport/Storage
Machine Weight
180 Lbs.
196 Lbs.
Machine Dimensions
63.7" L x 21.7" W x 38.5" H
63.7" L x 21.7" W x 38.5" H
Shipping Weight
232 Lbs.
248 Lbs.
Shipping Dimensions
54.75" L x 35.5" W x 45.25" H
54.75" L x 35.5" W x 45.25" H
Figure 2
Wrapped
Bail Bar
Spring
Bail Bar
Bracket
Bail Bar
Spring
Cable Tie
Tine
Position
Lever