Flowserve MP1 Sier-Bath - Manual (Page 42)

MP1 USER INSTRUCTIONS ENGLISH 26999958 – 10-12
Page 42 of 48 flowserve.com
8.2 General Arrangement Drawing
The typical general arrangement drawing and any
specific drawings required by the contract will be sent
to the Purchaser separately unless the contract
specifically calls for these to be included into the User
Instructions. If required, copies of other drawings sent
separately to the Purchaser should be obtained from
the Purchaser and retained with these User
Instructions.
REF
NO
PART DESCRIPTION QTY
1690.1 NON DRIVE END COVER 1
4510.2 GASKETS 2
6572.X STUDS X
6574.X CAP SCREWS X
6579.X SHCS X
6875.8 TIMING GEAR DRIVEN 1
6581.X HEX NUTS X
6585.1 DOWEL PIN 4
6700.4 ANTI ROTATION KEY 1