Flowserve Polybase baseplates - Manual (Page 22)

Polybase Baseplate INSTRUCTIONS ENGLISH 71569284 – 12-10
Page 22 of 24 flowserve.com
9 CERTIFICATION
Certificates, determined from the contract
requirements, are provided with these instructions
where applicable. If required, copies of other
certificates sent separately to the Purchaser should
be obtained from Purchaser for retention with these
User Instructions.
10 OTHER RELEVANT
DOCUMENTATION AND MANUALS
10.1 Supplementary user instructions
Supplementary instructions such as for a pump,
driver, instrumentation, controller, seals, sealant
systems etc are provided as separate documents in
there original format. If further copies of these are
required they should be obtained from the supplier for
retention with these user instructions.
10.2 Change Notes
If any changes, agreed with Flowserve Pump
Division, are made to the product after it is supplied,
a record of the details should be maintained with
these User Instructions.
10.3 Additional sources of information
The following are excellent sources for additional
information on centrifugal pumps in general.
Pump Engineering Manual
R.E. Syska, J.R. Birk,
Flowserve Corporation, Dayton, Ohio, 1980.
Specification for Horizontal End Suction Centrifugal
Pumps for Chemical Process, ASME B73.1
The American Society of Mechanical Engineers,
New York, NY.
American National Standard for Centrifugal Pumps
for Nomenclature, Definitions, Design and Application
(ANSI/HI 1.1-1.3)
Hydraulic Institute, 9 Sylvan Way, Parsippany,
New Jersey 07054-3802.
American National Standard for Centrifugal Pumps
for Installation, Operation, and Maintenance (ANSI/HI
1.4)
Hydraulic Institute, 9 Sylvan Way, Parsippany,
New Jersey 07054-3802.
RESP73H Application of ASME B73.1-1991,
Specification for Horizontal End Suction Centrifugal
Pumps for Chemical Process, Process Industries
Practices
Construction Industry Institute, The University of
Texas at Austin, 3208 Red River Street, Suite 300,
Austin, Texas 78705.
Pump Handbook
2nd edition, Igor J. Karassik et al, McGraw-Hill, Inc.,
New York, NY, 1986.
Centrifugal Pump Sourcebook
John W. Dufour and William E. Nelson,
McGraw-Hill, Inc., New York, NY, 1993.
Pumping Manual, 9th edition
T.C. Dickenson, Elsevier Advanced Technology,
Kidlington, United Kingdom, 1995.
International Standard for End-suction centrifugal
pumps -- Baseplate and installation dimensions, ISO
3661
1, rue de Varembé
Case postale 56
CH-1211 Genève 20
Switzerland