Flowserve SMB Series Electric Actuators User Manual
Page 8
Advertising
SMB Series/SB Series Installation and Maintenance FCD LMENIM1401-04-AQ – 01/15
8
The motor nameplate is located on the motor. The nameplate contains the following information:
• ID Number
• Run Torque
• RPM
• Full Load Amps
• Insulation Class
• Horsepower
• Service Factor
• Hertz
• Ambient Temperature
• Start Torque
• Enclosure Type
• Volts
• Locked Rotor Amps
• Duty
• Phase
• Motor Code
• Connection Diagram
Figure 2.1 – Typical SMB (0 through 4)
Motor
Declutch lever
Handwheel
Housing
Switch compartment
Advertising
This manual is related to the following products: