Fluke Biomedical 35035 - Manual (Page 17)

Maintenance
Fuse Replacement
4
4-5
4.7 Fuse Replacement
The fuse is a 5 x 20 mm type F2AH250V. Do not use fuses of a different type or rating.
If the fuse has blown, the meter operation should
be checked to ensure other damage has not
occurred.
1. Turn the meter OFF and remove the test leads.
2. Place the end of a flat-blade screwdriver into the slot in the fuse holder. Press inward slightly and
rotate the fuse carrier one-quarter turn counterclockwise. Release pressure and extract the fuse
carrier and the fuse.
3. Remove the defective fuse and replace it with the new fuse.
4. Re-install the fuse carrier with the new fuse turning the carrier one-quarter turn clockwise into its
holder.
4.8 Recalibration & Repair Information / Technical Assistance
If your instrument needs recalibration or repair, we request that you consult Fluke Biomedical, Radiation
Management Services at 800.850.4606, 440.498.2564, or by Fax at 440.542.3682.
More information concerning the operation, application, or service of your instrument may be obtained
from the applications engineer at the above office.
4.9 Warranty Information
Should your instrument require warranty service, consult Fluke Biomedical, Radiation Management
Services at 800.850.4606, 440.498.2564, or by Fax 440.542.3682.
WARNING