Formax 6402 Series - Manual (Page 43)

41
ENGLISH
Note
You can only copy job settings to new jobs.
5. Press for details of the job to copy from.
6. Press to copy the job settings.
If all jobs are programmed the display shows “No more free jobs”.
It is possible to copy a AutoSet job into a job. Before a AutoSet job can be copied
AutoSet has to be defined successfully (see 3.7.1 ”Using AutoSet” on page 27).
3.12 Delete a Job
To delete an existing job:
1. Press from “main menu (2)” (see 2.4.1 ”Main Menu” on page 10).
2. Enter the pin code.
The “job menu” opens (see 2.4.5 ”Job Menu” on
page 14).
3. Press .
The “delete job” menu appears.
4. Press the arrows if you want to select an other
job number.
5. Press for job details.
6. Press . The job will be deleted without a warning.