Formax 6402 Series - Manual (Page 46)

44
4.2.3 Document Orientation
Switch on the OMR-function and set the position of the reading marks as described in
“Optical Mark Recognition Settings (Option)” on page 36.
Document orientation:
4.2.4 OMR Codes
Printing Quality
• Marks should be printed in black.
• Marks on the same sheet must have equal intensity.
• Marks must be printed on the same position on every sheet.
• For matrix printers near letter quality (NLQ) printed characters are preferred to obtain
maximum blackness (double strike).
• Be aware of background ‘noise’. Color changes on the form, background design, a
logo or copy on the opposite side of the sheet that will bleed through can be read by
the reading head causing disturbances of the OMR function.
• The ribbon or toner quality must be checked before printing.
Fold type Type of documents
no fold single fold
letter fold
zig-zag fold
double
parallel fold
Address carrier, face up and leading.
Address carrier, face down and trailing.
address
direction
first page
OMR
start reading
OMR
stop reading
address
direction
(duplex printed)
last page OMR
start reading
OMR
stop reading
123
32
1