Formax 6606 Series - Manual (Page 61)

Adjust the Side Guides
To adjust the side guides it is best to remove the document feeder tray from the feeder as
follows:
Push handle A downwards. 1.
2. Lift the document feeder tray upwards to unhook it and then pull it out from the feeder.
3. Loosen the knob B half a turn.
4. Grab the side guides in the middle and push them apart as far as possible.
5. Put a small stack of documents between the side guides.
6. Grab the side guides in the middle and push them towards the documents.The space
between the side guides and the documents should be such that the documents have
just enough play to move freely.
7. Re-tighten knob B.
8. Remove the stack of documents.
9. Replace the document feeder tray (see Installing the Document Feeder Trays on page
56).
4
English
57
| Page 57 | feb-24-2014 01:32 | Loading the System