Formax Cut-True 27A - Manual (Page 19)

6. Remove the blade change safety tool from the
tool box and screw the handles into the two holes
to the left and right of center (see photos). Screw
them in tightly, to prevent the blade from falling
out of the holder.
8. Grip and loosen both of the blade change tool
handles by turning just a half reverse turn to
remove the blade from the machine.
Carefully move the blade and holder downward
in order to remove it safely from the machine.
NOTE: Be careful to avoid injury from the very
sharp blade.
7. With the blade change safety tool in place, use
the T-wrench to remove the center screw.
9. Carefully remove the old blade from the blade
change safety tool. Set it on a flat surface and
unscrew the handles. Cap the old blade with a
protective pad to prevent injury.
16