Formax Cut-True 27A - Manual (Page 4)

SAFETY GUIDELINES
SPECIFICATIONS
* Operators should read this manual prior to using the cutter.
* The Cut-True 27A should only be used by one person at a time.
* Keep hands away from the cutting area. The cutter is operated by pressing two “enable switches” simultaneously.
* Do not disassemble Plexiglas safety covers, and never attempt to change the settings of any protective devices.
* Do not grasp underneath the blade edge.
* When changing the blade, carefully follow the instructions in this manual, and be sure to use the supplied Blade
Change Safety Tool. Wear leather gloves to provide additional safety.
* The Cut-True 27A is designed to cut only paper. DO NOT attempt to cut non-paper materials including metal sheets,
wood, plastic or anything other than paper. Machine damage and/or personal injury may occur.
* Be sure to check the safety devices before each operating session.
Cut-True 27A Guillotine Cutter
1
Cutting Action: Dual-button electric
Maximum Cutting Width: 18.9” (480mm)
Maximum Paper Stack Height: 3.15” (80mm)
LED / Laser Cut Line: Yes
Clamp Style: Automatic
Back Gauge Adjustment: Touchscreen or electronic hand wheel
Back Gauge Reading: Digital readout, in both inches and metric
Programmable Jobs: Up to 99, with up to 30 cuts
Blade Change Safety Tool: Included
Dimensions: 60” H x 36” W x 40” D (1520mm H x 920mm W x 1000mm D)
Weight: 575 lbs. (260kg)
Power Supply: 110V, 20A dedicated line
Safety Certifications: CE approved, UL pending
Metal Stand with Shelf: Included, some assembly required