7] key entry, beeper, and vibrator test – Denso BHT-100Q User Manual
Page 106
90
[5.7]
Key entry, beeper, and vibrator test
Selecting "7:KEY & VIBRATION" on the TEST menu
calls up the screen shown at left and makes the
BHT ready for entry from the keypad.
Pressing individual keys displays the identifier let-
ters in the positions pre-assigned to those keys on
the LCD as well as sounding the beeper or running
the vibrator. (As long as the individual key is held
down, the BHT continues beeping or vibrating.)
Pressing the same key again erases the displayed
letter.
The table below shows the relationship between the keys, the identifier letters to be
displayed on the LCD, and the frequencies (Hz) of the beeper.
(Note) Only when the M3 (left-hand trigger switch) or M4 key (right-hand trigger
switch) is pressed, the vibrator works.
Key
Letter Beeper (Hz)
M3
F
(Note)
M1
D
293
M2
E
329
M4
G
(Note)
7
7
391
8
8
440
9
9
493
4
4
523
5
5
587
6
6
659
After all keys are pressed and displayed on the
LCD, this test automatically ends and the screen
returns to the TEST menu.
To stop this test, turn the power off.
Key
Letter Beeper (Hz)
1
1
698
2
2
783
3
3
880
0
0
987
.
.
1046
ENT
=
1174
BS
A
1318
C
B
1396
SF
C
1567