Program execution, 1 ] program execution – Denso BHT-100Q User Manual
Page 61
Advertising
45
Chapter 2. Getting Started the BHT and System Mode
2.5.3 Detailed Description of the Functions in System
Mode
[ 1 ] Program Execution
Selecting "1:EXEC PROGRAM" on the SYSTEM
MENU calls up the screen shown at left.
If more than one program has been downloaded
to the user area of the target memory, use the
M1 and M2
keys to move the cursor to a target
program, and then press the ENT key.
To return to the SYSTEM MENU, press the C key.
If more than 22 programs have been downloaded,
you may need to scroll the screen with the M2 key.
⇓
Advertising
This manual is related to the following products: