Denso BHT-100Q - Manual (Page 58)

42
In addition to the functions given on the previous pages, System Mode has these four
functions: Deleting files, Downloading/uploading the BHT system parameter file, Set-
ting the remote wakeup parameters, and Downloading/uploading the system message
file.
To call up these functions, press the 0, 3, 4 or 6 key, respectively, while holding down
the SF key when the SYSTEM MENU is displayed.
SYSTEM MENU ⇐ Press the PW key while holding down the SF
and 1 keys.
Deleting files
Deletes a program file or data file
stored in the memory.
(Refer to Subsection 2.5.3, [ 7 ].)
Downloading/uploading the BHT
system parameter file
Downloads or uploads the system
parameter file.
(Refer to Subsection 2.5.3, [ 8 ].)
Setting the remote wakeup parameters
Sets the remote wakeup parameters.
(Refer to Subsection 2.5.3, [ 9 ].)
0 with SF
held down
3 with SF
held down
4 with SF
held down
6 with SF
held down
Downloading/uploading the system
message file
Downloads or uploads the system
message file.
(Refer to Subsection 2.5.3, [ 10 ].)