Denso BHT-100Q - Manual (Page 149)

133
Chapter 4. Error Messages
System down error
■ Problem
An error has occurred during execution of System
Program.
If this error occurs, the BHT beeps five times
(for 0.1 second per beep).
■ Solution
Unload and reload the battery cartridge, then turn
on the power.
If this error occurs frequently, make a note of the
message and codes on the LCD and contact your
nearest dealer.
System administrator to be called
■ Problem
Any of the following errors has occurred:
(1) Hardware error
Calendar clock error: (1010)
Flash memory error: (1020)
(2) Memory storage error (2XXX)
(3) Execution program error (3010)
(XXXX: Error code)
If any of the above errors occurs, the BHT
beeps five times (for 0.1 second per beep)
and then turns itself off.
■ Solution
Turn on the power again.
If error (1) above occurs frequently, contact your
nearest dealer.
If error (2) occurs frequently, initialize the BHT
System (the whole user area including the font file
area).
If error (3) occurs frequently, delete the execution
program file that causes this error or download
the original execution program file to overwrite
the current one.