Denso BHT-100Q - Manual (Page 68)

52
If you select "1:ONE FILE" or "2:ALL FILES" on the
UPLOAD menu when no files are stored in the
memory, the message shown at left will appear.
Pressing the C key returns to the UPLOAD menu.
Upload screens
Upon start of optional Ir-Transfer Utility C/Ir-Trans-
fer Utility E/Transfer Utility or equivalent program
(upon receipt of an ACK code from the host com-
puter), the BHT displays the file name and the
number of sent records/the total number of records
on the screen as shown at left.
To abort the uploading operation, press the C key.
The screen will switch back to the UPLOAD menu.
(Refer to the "Ir-Transfer Utility C Guide"/"Ir-Trans-
fer Utility E Guide"/"Transfer Utility Guide.")
If you select "1:ONE FILE" and choose a file to be
uploaded or if you select the "2:ALL FILES" or
"3:HT<-->HT COPY" on the UPLOAD menu, then
the screen shown at left will appear.
If you select "2:ALL FILES" or "3:HT<-->HT COPY,"
the "ALL" or "HT<-->HT" will appear in the center of
the 2nd line, respectively.
Showing this screen, the BHT waits for a file(s) to
be uploaded.
⇓
⇓