Foxconn X38A - Manual (Page 35)

29
Chapter 3 BIOS Description
USB Mass Storage Device Menu
v USB Mass Storage Reset Delay
Number of seconds POST waits for the USB mass storage device after start
unit command.
v Emulation Type
This item is used to select the type of emulation used during the boot sequence.
2.3 SuperIO Configuration
Scroll to this item and press <Enter> to view the following screen:
SuperIO Configuration Menu
v OnBoard Floppy Controller
This item is used to enable or disable floppy controller.
v Serial Port1 / 2 Address
This item specifies the base I/O port address and interrupt request address
of serial port 1 / 2.
Note: Do not try to set the same values for serial ports 1 and 2.
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn