Foxconn X38A - Manual (Page 76)

70
Chapter 5 RAID Configuration
7. key in the RAID volume “Capacity” value, then Press <Enter>. The default value
indicates the maximum capacity.
8. Select “Create Volume” and Press <Enter>, a warning message will appear
as below:
Press <Y> to create the volume and return to the main menu.
Press <N> to return to the “Create RAID Volume” menu.
1. Select “1.Create RAID Volume” from the utility main menu and press <Enter>.
2. Key in a name for the RAID 1 according to the [DISK/VOLUME INFORMATION]
and press <Enter> to confirm.
Creating RAID 1
Attention:
You will lost all data on the selected hard disk when you press <Y>
to create the volume.
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn