GAI-Tronics 701-312 Handset/Speaker Amplifier - Manual

Pub. 42004-319
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 701-312 Page/Party ®
600-Ohm Handset/Speaker Amplifier
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics
retains all intellectual property and other rights in or to the information contained herein, and such
information may only be used in connection with the operation of your GAI-Tronics product or system.
This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
The Model 701-312 Page/Party ® 600-Ohm Handset/Speaker Amplifier is an important component of a
GAI-Tronics Page/Party
®
system. This handset/speaker amplifier is ideal for applications that require long
cable runs. Use the Model 701-312 Handset/Speaker Amplifier in Page/Party ® systems that require cable
runs exceeding one mile (1.6 km) from the system line balance assembly.
Installation
NOTE
Do not install the Model 701-312 in a 33-ohm system or audio levels will be low.
CAUTION
Do not install this equipment in hazardous areas. Installing in hazardous areas may cause a safety
hazard and consequent injury or property damage.
The Model 701-312 Handset/Speaker Amplifier is a plug-in amplifier that mates directly with the Model
702, 703, 732 and 733 Series Amplifier Enclosures. To install the handset/speaker amplifier, simply plug
it into the enclosure.
Figure 1 shows installation and adjustment details. Please refer to the drawing when you are installing and
adjusting the amplifier.