GAI-Tronics 701-312 Handset/Speaker Amplifier User Manual
Page 5
Pub. 42004-319
Model 701-312 Page/Party
®
600-Ohm Handset/Speaker Amplifier
Page:
5 of 5
\\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-319.doc
3/00
Speaker Amplifier
Output ............................................................................... 12 watts minimum with nominal supply voltage
Voltage gain ............................................................................................................ 26 dB max, adjustable
Frequency response......................................................................... 250–4,000 Hz, +0, -3 dB ref. to 1 kHz
Distortion ...................................................................................... 1% maximum THD @ 1 kHz, 12 watts
Input impedance............................................................................................................. 50,000 ohms nom.
Controls................................................................................. Speaker volume (adjusted through the access
hole behind the nameplate on the front panel)
General
Temperature range (operating/storage) ............................................... -22º F to +158º F (-30º C to +70º C)
Dimensions.............................................. 8.1 H
× 8.1 W × 3 D inches (20.6 × 20.6 × 7.6 cm) behind panel
8.1
H
× 8.1 W × 3.5 D inches (20.6 × 20.6 × 8.9 cm) front of panel
Shipping weight .................................................................................................................6.8 lbs. (3.1 kg)
Replacement Parts
Part Number
Description
10112-101 Handset
Assembly
13204-002 Receiver
Cap
12511-001
Dynamic Transmitter and Cap
12525-001
Pressbar Switch Kit
12514-007
6-foot PVC Cord and Bushing
12514-008
15-foot PVC Cord and Bushing
12514-009
25-foot PVC Cord and Bushing
12514-004
6-foot Hytrel Cord and Bushing
12514-005
15-foot Hytrel Cord and Bushing
12514-006
25-foot Hytrel Cord and Bushing
69701-016
Printed Circuit Board
12523-001
GAI-Tronics Nameplate Kit
12508-005
Amplifier Enclosure Mounting Hardware
12512-008 Hookswitch/Cradle Assembly Kit
12530-001 Transformer/
Conn. Subassembly
25210-005 Cell
Gasket
10440-002
16-pin ribbon cable connector
12604-001
0.7 amp (10 pack)
12604-002
1/16 amp (10 pack)