GAI-Tronics 226-002 Div. 2 Industrial Telephons - Manual (Page 2)

P UB . 42004-339F
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 226-002, 341-001, and 351-001
Div. 2 Industrial Telephones
Confidentiality Notice
This manual is provided solely as an installation, operation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics
retains all intellectual property and other rights in or to the information contained herein, and such
information may only be used in connection with the operation of your GAI-Tronics product or system.
This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
GAI-Tronics Div. 2 Industrial Telephones are designed for applications where standard telephones could
cause a hazardous condition. These industrial-strength telephones are ideally suited for conditions that
are too harsh for a standard telephone. The telephones operate the same as a standard telephone—simply
lift the handset and dial the desired telephone number. The telephones are fully line-powered and do not
require internal batteries.
Installation Guidelines
When installing any GAI-Tronics telephone equipment, please adhere to the following guidelines to
ensure the safety of all personnel:
 NEVER install telephone wiring during a lightning storm.
 Install a UL Listed lightning arrestor on any telephone installed where the telephone or telephone
cable is at risk of being exposed to lightning strikes. The lightning arrestor must be installed as close
to the telephone as possible to maximize the protection. The lightning arrestor must not be installed
within the enclosure supplied with the telephone.
 NEVER install telephone jacks in wet locations unless the jack is specifically designed for wet
locations.
 NEVER touch uninsulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface.
 USE CAUTION when installing or modifying telephone lines.
 Install UL Listed telephone line suppressor (customer-supplied) on the telephone line.
 Use silicone sealant or equivalent around and inside all conduit entries