Specifications – GAI-Tronics 238-002 Stainless Steel Surface-mount Call Box Enclosure User Manual
Page 2
Pub. 42004-496A
Model 238-002 Stainless Steel Surface-Mount Enclosure
Page
2 of 4
f:\standard ioms - current release\42004 instr. manuals\42004-496a.doc
05/15
2. Mount the enclosure on a flat wall surface using the four 0.312-inch diameter holes as shown in
Figure 1. Four rubber washers are provided to ensure weather-tight sealing.
N
OTE
: Mounting hardware is not provided.
3. Use sealed conduit fitting.
Specifications
Construction ........................................................................... Type 304 stainless steel, 0.063-inch thickness
Finish ........................................................................................................................ Brushed and passivated
Mounting ........................................... Four 5/16-inch (0.312) diameter mounting holes in mounting bosses
Dimensions .................................... 12.13 H
10.18 W 3.06 D inches (308 259 77.7 mm) maximum
Shipping weight ................................................................................................................ 5.0 lbs. maximum
Figure 1. Model 238-002 Surface-Mount Enclosure Outline