GAI-Tronics 7335-004 SmartSeries Multi-Party Emergency Party Line Amplifier Enclosure User Manual

Confidentiality notice, General information

Advertising
background image

Pub. 42004-623L2A

GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA

610-777-1374

„ 800-492-1212 „ Fax: 610-796-5954

V

ISIT WWW

.

GAI

-

TRONICS

.

COM FOR PRODUCT LITERATURE AND MANUALS

G A I - T R O N I C S ® C O R P O R A T I O N

A H U B B E L L C O M P A N Y

Model 7335-004 Outdoor Non-metallic

Emergency Party Line Amplifier Enclosure

Confidentiality Notice

This manual is provided solely as an operation, installation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics retains
all intellectual property and other rights in or to the information contained herein, and such information may
only be used in connection with the operation of your GAI-Tronics product or system. This manual may not
be disclosed in any form, in whole or in part, directly or indirectly, to any third party.

General Information

The Model 7335-004 Outdoor Non-metallic Emergency Party Line Amplifier Enclosure is designed to be a
component in a GAI-Tronics SmartSeries system. It is a multi-party, 115 V amplifier enclosure that mates
with a Model 701-80x or 701-90x Series Handset/Speaker Amplifier to form a SmartSeries station.

When connected to a SmartSeries system, this station is equipped to report the following information when
the handset is taken off-hook:

• Zone number
• Station address
• Party line (1 or 2)

All station reports are received by the Master Control Unit and annunciated on an access panel located in
the SmartSeries control cabinet.

N

OTES

:

1. The Model 7335-004 Enclosure can also mate with a standard 701 or 751 Series Amplifier; however
the reporting feature is not operable with this combination.

2. Emergency party line functionality is only possible if your system’s software is properly configured.
Your system must also have the address of the station intended to mate with the enclosure enabled. Should
you have questions as to the capabilities of your system, please contact your nearest GAI-Tronics Service
Center.

Advertising