GAI-Tronics 7245-005 SmartSeries Indoor Remote Subset Amplifier Enclosure - Manual

Pub. 42004-684L2B
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 7245-005 Indoor
Remote Subset Amplifier Enclosure
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics. GAI-
Tronics retains all intellectual property and other rights in or to the information contained herein, and
such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
Product Overview
The Model 7245-005 Indoor Remote Subset Amplifier Enclosure is intended for use in GAI-Tronics
Page/Party
® and SmartSeries ADVANCE systems. The enclosure enables the amplifier, speaker, and
field cabling of subset stations to be remotely mounted. This indoor amplifier enclosure is constructed of
fabricated steel and is equipped with a 24-position remote subset connector.
System Requirements and Limitations
For proper operation, the Model 7245-005 Amplifier Enclosure must be installed with a Model 723-005
or 723-905 Remote Amplifier and with a subset from the following list:
Single Party Subsets: Multi-Party Subsets:
Model 726-101 Desktop Subset Model 7265-101 Desktop Subset (5-party)
Model 711-102 Desk-Edge Subset Model 7115-102 Desk-Edge Subset (5-party)
Model 716-102 Flush-Mount Subset Model 7165-102 Flush-Mount Subset (5-party)
The amplifier enclosure must be mounted within 8 feet of the subset due to the subset cable limitations.
In addition, the amplifier enclosure must be mounted at an indoor location - the amplifier enclosure is not
designed for outdoor use.
In order to provide SmartSeries features, the amplifier enclosure must be connected to a Model 723-905
Remote SmartSeries Subset Amplifier. The SmartVolume
™ feature is not supported for the
Model 7265-101 Subset. Also, the SmartVolume ™ feature is not supported for speakers equipped with
L-pads or for multiple speaker applications.