GAI-Tronics 7085-004-UL, 7085-004-EX SmartSeries Multi-Party Hazardous Area Handset/Speaker Amplifier Enclosure w/ Alternate Page - Manual

Pub. 42004-694L2B
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 7085-004-UL and 7085-004-EX
SmartSeries Multi-Party Hazardous Area
Amplifier Enclosures with Alternate Page
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics retains
all intellectual property and other rights in or to the information contained herein, and such information may
only be used in connection with the operation of your GAI-Tronics product or system. This manual may not
be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
The Model 7085-004-UL and 7085-004-EX Multi-Party Amplifier Enclosures with Alternate Page are
components of the 700 Series Page/Party
®
system. These enclosures are configured for multi-party
systems, which can accommodate conversations on up to five party lines simultaneously. Additionally,
alternate page designations can be software configured when used with a GAI-Tronics ADVANCE system.
Control of these alternate page destinations is through a second selector switch.
They are constructed of cast aluminum and are extremely weatherproof and corrosion-resistant. These
enclosures are equipped with terminal strips for connecting system cable. The Model 709-901 SmartSeries
Amplifier mates directly with this enclosure.
Models 7085-004-UL and 7085-004-EX differ in design by
their conduit or cable entries. The Model 7085-004-UL
Enclosure contains NPT threads and the Model 7085-004-EX
Enclosure contains metric threads.
Installation
These enclosures must be installed by trained, qualified and
competent personnel. Installation must comply with state and
national regulations, as well as safety practices for this type of
equipment.
CAUTION
Do not install this equipment in
hazardous areas other than those indicated on the approval
listing in the Specifications section of this manual. Such
installation may cause a safety hazard and consequent injury
Figure 1. The Model 7085-004-UL/EX