Front cover reattachment – GAI-Tronics ICS Page/Part Weatherproof Handset/Speaker Amplifier Station User Manual
Page 3
Pub. 42004-718L2HQG
ICS Weatherproof Page/Party
®
Station Quick Installation Guide
Page 3 of 3
f:\standard ioms - current release\42004-xxxxqg quick guides\42004-718l2hqg.doc
11/14
Figure 3. Typical installation wiring configuration
N
OTE
:
Station input power can be through system cable or through a separate power source cable.
See Pub. 42004-718L2 for the possible beacon, RTU activation, and speaker impedance configurations.
Front Cover Reattachment
Connect any cable harnesses that were disconnected during mounting. Place the front cover inside the rear enclosure, being careful
not to pinch any cables. Attach the front cover with the four screws and washers provided. Torque the screws to 10–12 in-lbs
(1.13–1.36 n-m).
NRTL Listed for USA and Canada ....................................................................................................................... UL/CSA 60950
CE Mark