GAI-Tronics 12505-001 Repl. Door Assembly - Manual

Pub. 42003-008A
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Replacement Door Kit
for Weatherproof Enclosures
Model 12505-001
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 12505-001 Replacement Door Kit is for use on the following GAI-Tronics weatherproof
enclosures:
632 648 732 10437-001 10437-003
6325 6485 7325 10437-002 211A
This kit includes the following components:
Item Qty. Description
1 1 Door
2 2 Washer
3 2 Hinge
pin
4 4 Pin retainer
5 1 Gasket
Installation
Unpack the material and compare parts to the list below to ensure that all parts are present.
(N
OTE : A ¼-inch hex nut driver is required for some assembly.)
1. Remove the two hinge pins by driving the upper pin downward and the lower pin upward.
2. After removing the old door from the enclosure, check the fit and clearance of the replacement door
by placing the door assembly onto the enclosure. Place two washers (item 2) between the upper and
lower door and enclosure hinge bosses. File the material from the door bosses if more clearance is
required.