GAI-Tronics 12504-004 Repl. Door Handle Kit - Manual (Page 3)

Pub. 42003-011B
M ODEL 12504-004 R EPLACEMENT D OOR H ANDLE R EPLACEMENT K IT Page: 3 of 3
\\s_eng\gtcproddocs\standard ioms - current release\42003 kit manuals\42003-011b.doc
7/05
5. On the inside of the door, rotate the straight arm of the torsion spring counterclockwise 180° prior to
installing it into the hole in the handle shaft. This should be done while maintaining the shaft position
mentioned in Step 3.
6. Check the free rotation of the handle by rotating the handle to the locked position and releasing it. The
handle should rotate freely (spring back) to the unlocked position against the stop boss on the front of
the door.
Figure 2.
Figure 3.