GAI-Tronics 12513-006 Valox Door Kit - Manual (Page 2)

Pub. 42003-021A
V ALOX ® D OOR R EPLACEMENT K IT Page: 2 of 2
\\s_eng\gtcproddocs\standard ioms - current release\42003 kit manuals\42003-021a.doc
2/97
5. Fasten the new upper male hinge half to the mid-section of the enclosure.
6. Position the new door by mating the upper hinge halves.
7. Mate the lower male hinge half with the door hinge half, and position it in place with the mid-section.
Fasten them with the two new screws.
8. To adjust as necessary, loosen the screws, shift the hinge; retighten the screws and close the door.