GAI-Tronics 12514-004, 12514-005, 12514-006 Thermoplastic Elastomer Cord Kits - Manual

Pub. 42003- 026C
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Thermoplastic Elastomer Cord
Replacement Kit
M
ODELS
12514-004, 12514-005,
AND
12514-006
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information which is confidential and proprietary to GAI-Tronics. GAI-Tronics
retains all intellectual property and other rights in or to the information contained herein, and such
information may only be used in connection with the operation of your GAI-Tronics product or system.
This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
The cord replacement kits can be used on the following models:
240 248 257 272 701-804 9081 9105A
246 250 258 701-602 9001 9085 9205A
247 256 262 701-802 9005 9101A 12576-215
This kit includes the following parts:
Qty Description
1 Handset Cord Fastener Clip
2 Tie Wraps
1 6-foot Retractile Thermoplastic Elastomer Cord (Kit 12514-004 Only)
1 15-foot Retractile Thermoplastic Elastomer Cord (Kit 12514-005 Only)
1 25-foot Retractile Thermoplastic Elastomer Cord (Kit 12514-006 Only)
Installation Instructions
Models 240, 246, 247, 248, 250, 256, 257, and 258
Removal of Old Cord
1. Loosen and remove the screws securing the front panel. Pull the front panel away from the back
enclosure.
2. Disconnect the modular telephone line from the printed circuit board. Disconnect the 4 telephone wires
from the printed circuit board assembly (PCBA).